Advertisement
Step 7
Using a flat screwdriver, remove the grommet from the
T-tube.
Step 9
Reverse the steps.
ATTENTION: Charge battery 5 hours before using.
Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
Step 8
Using a long wire or shoelace, tape one end to throttle
wire end that connects to controller. Pull the wire from the
handlebar side. Make sure the wire or shoelace is long
enough. Remove old throttle and tape the new throttle to
the wire or shoelace to help you run the cable through.
Reverse steps for re-assembly.
3
Advertisement
