Advertisement
Quick Links
Required Tools: (Not included)
A. Phillips screwdriver
B. 5 mm Allen wrench
C. 10 mm wrench
WARNING
CAUTION: To avoid potential shock or other injury, turn power switch OFF and disconnect
charger before conducting any assembly or maintenance procedures. Failure to follow these
steps in the correct order may cause irreparable damage.
Step 1
Using a Phillips screwdriver, remove six (6) screws from
the deck. Remove the deck from the unit and set aside.
Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
REAR FENDER REPLACEMENT
C25 PART # W13113290021
C35
C25 SLA PART # W13113291009
C35
Step 2
Locate and disconnect two (2) rear fender connectors.
C25 & C25 SLA
C35 & C35
1
Advertisement
Related Manuals for Razor W13113290021
Summary of Contents for Razor W13113290021
- Page 1 Using a Phillips screwdriver, remove six (6) screws from Locate and disconnect two (2) rear fender connectors. the deck. Remove the deck from the unit and set aside. Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
- Page 2 • Reposition the deck and attach with the screws that were removed in Step 1. ATTENTION: Charge battery 8 hours before using. Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
Need help?
Do you have a question about the W13113290021 and is the answer not in the manual?
Questions and answers