Step 3
Cut the zip ties that keep the cables together. Be careful,
do not cut the cables.
Step 5
Using a 2 mm Allen wrench, loosen the set screw from
the throttle and slide throttle away from the grip.
Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
Step 4
Locate and disconnect the throttle from the controller,
(three wires: blue, red and black)
Step 6
Insert a flat screwdriver between the handle and grip
and apply a few drops of WD40
remove the grip.
or soapy water to help
®
2