Table of Contents
Advertisement
67
4
5
6
7
8
Slide Harness Straps into
Slots in Pad and Attach
Fasteners
Starting at Top of Seat, Slip
Pad on Shell
Push Harness Holders
Through Slots in Pad
Wrap Around Bottom and
Sides of Shell
Pull harness adjustment strap
through slot in pad.
Attach Fasteners
Installing Harness System
1
Fully Recline the Child
Restraint
Pull out on recline handle and
push top of child restraint back.
2
Insert Buckle's Metal Retainer
into Slot Closest to Child
Buckle must face out.
1
Rear-Facing
2
the 1st or 2nd buckle slots.
3
Forward-Facing
can be used.
Reach Under Seat Between
3
Base and Shell and Through
Recline Handle
Pull metal retainer completely
through pad and shell.
Check Buckle
4
Pull up on buckle to make sure it
is secured.
The buckle must not pull out.
68
Mode: You must use
Mode: Any slot
continued on next page
Advertisement
Table of Contents
