Installing Harness System - Safety 1st onBoard 35 Manual

Installing Harness System

47
1
2
3
4
Thread Harness Strap
With the sewn end of the harness
strap loop facing the buckle, thread
the harness strap down through the
hip harness slot.
5
Pull Up Front of Seat Pad
Insert Buckle's Metal
Retainer into Buckle
Slot Closest to Child
The buckle must face out.
From Bottom of Car Seat, Pull
Metal Retainer Completely
Through Pad and Shell
Check Buckle
Pull up on the buckle to make sure it
is secured.
The buckle must not pull out.
6
Weave Harness Strap In and
Out of Shell As Shown
7
Make Harness Strap Even
The sewn ends of the harness strap
loops must face each other.
8
Thread Buckle and Chest Clip
The harness strap ends go through
the back of the buckle on tongues
and through the chest clip front to
back as shown.
48
continued on next page