Table of Contents
Advertisement
47
Cleaning Parts of Car Seat & Installing Seat Pad Set
Cleaning Pad & Accessories
Machine wash separately with cold water on a gentle cycle.
DO NOT use bleach. Tumble dry separately for 10-12 minutes
on low heat. Remove immediately.
Cleaning Harness Strap
Check the harness straps often for any wear or damage.
Spot clean using warm sudsy water and damp cloth. Spilled
food and liquids on the car seat may result in mold or bacterial
growth over time. These spills could also attract insects or
rodents.
To Clean Canopy
Hand wash using warm sudsy water. Line dry.
DO NOT use the child restraint without the seat pad or with damaged harness straps.
Cleaning Buckle & Car Seat
Spot clean using warm sudsy water and damp cloth. DO NOT
submerge into water.
Installing Seat Pad Set
1. Starting from the top of the car seat, slip the pad on the car
seat. Push the pad tabs at the top of the car seat through the
slots in the pad.
2. Pull the harness adjustment strap through the slot in the
pad. Wrap the pad around the bottom of the car seat.
3. Attach the tabs on the sides to the car seat. Attach the
elastic straps to the belt path guides.
Install the harness system. See pages 48-52.
WARNING:
Installing Harness System
1
From Bottom of
Insert Buckle's Metal
Retainer into Buckle
Car Seat, Pull Metal
Slot Closest to Child
Retainer Completely
Through Pad
The buckle MUST face out.
& Car Seat
3
2
Check Buckle
Pull up on the buckle to
make sure it is secured.
The buckle MUST NOT pull
out.
continued on next page
48
Advertisement
Table of Contents
