Installing Harness System - Safety 1st Guide 65 Manual

Installing Harness System

55
1
Insert Buckle's Metal
Retainer into Slot
Closest to Child
1
Buckle must face out.
2
3
Rear-Facing
You must use the 1st or
2nd buckle slots.
Forward-Facing
Any slot can be used.
2
Pull Metal Retainer
Completely Through
Pad and Shell
3
Check Buckle
Pull up on buckle to make sure
it is secured.
The buckle must not pull out.
Mode:
Mode:
4
Thread Harness Strap
With sewn end of harness strap
loop facing the buckle, thread
harness strap down through hip
harness slot.
5
Pull Harness Strap
Across Bottom of Shell
Push harness strap up through other
hip harness slot.
Do not twist harness strap.
6
Make Harness Strap Even
Sewn ends of harness strap loops
must face each other when you hold
them up.
56
continued on next page