Installing Harness System - Safety 1st Air Protect Rumi Air Instructions Manual

Do not use child restraint without the pad.
1.
2.
24
4358-5626A Rumi S1 Inst.indd 27-28 4358-5626A Rumi S1 Inst.indd 27-28
Replace Bottom Seat
Pad
Starting from the front of
the child restraint, push
the hard rolled end into the
space in the front of the
shell. Insert the harness
adjustment strap into the
slot under the flap
Attached the fastening strip
between the backrest pad
and bottom seat pad.
Rethread harness system
(see section C-9).
C-9 Installing Harness System
1. Install Buckle
Insert the buckle's metal
retainer through the
2
desired slot. Make sure
3
buckle is facing forward
1
and the pad slots are align
with shell slots.
NOTE:
Slot 2 is for children weighing 22 (10.1 kg) to 40 lbs (18 kg).
Slot 3 is for children weighing 40(18.1 kg) to 65 lbs (29.4 kg).
2. With the storage drawer
opened, pull buckle's
metal retainer completely
through pad and shell
from bottom of seat.
3. Check Buckle
Pull up on buckle to make
sure it is secured. The
buckle's metal retainer
must not pull out.
Failure to place buckle's metal retainer
completely through pad and plastic shell can
result in serious injury or death.
25 continued on next page.
2/23/12 2:46 PM 2/23/12 2:46 PM