Federal Communications Commission (Fcc) Warning; For Customers In Canada; For Customers In Taiwan - FujiFilm FP-Z8000 Owner's Manual

NOTICES
Verification
Model Number: FP-Z8000/FP-Z6000
Trade Mark: Fujifilm
Address: 200 Summit Lake Drive, Valhalla, NY 10595-1356, U.S.A.
Tel: 019147898100
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Caution:This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
FCC Warning:To assure continued compliance, follow the attached installation instructions. This
includes using the provided power cord and shielded interface cables when connecting to
computer or peripheral devices. Also, any unauthorized changes or modifications to this
equipment could void the user's authority to operate this device.

Federal Communications Commission (FCC) Warning



For Customers in Canada


For Customers in New Zealand and Australia


For Customers in Taiwan


For Customers in Korea

For Customers in Japan

For Customers in UK

For Customers in the EU

About the Icons

Disposal of Electrical and Electronic Equipment in Private Households in the European Union,

Norway, Iceland and Liechtenstein:
Battery Safety Precautions

Federal Communications Commission (FCC)
Warning
A shielded-type power cord is required in order to meet FCC emission limits and also to
prevent interference to the nearby radio and television reception. It is essential that only the
supplied power cord be used.
Use only shielded signal cables to connect I/O devices to this equipment.
For Customers in Canada
CAN ICES-3(A)/NMB-3(A)
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
For Customers in New Zealand and Australia
WARNING: This equipment is compliant with Class A of AS/NZS CISPR32. In a residential
environment this equipment may cause radio interference.
For Customers in Taiwan
警告使⽤者: