Basic Operation - FujiFilm FP-Z8000 Owner's Manual

Basic Operation

Before installing the projector, master the basics of its operation as described below.
1
Rotate the lens.
The lens can be rotated and is equipped latches for the arm and projector head. Rotate the
lens as described below. Be sure to latch the lens while projector is in use.
CAUTIONS
d
Some portions of the projected image may not be visible depending on lens shift
and the orientation of the lens.
When rotated, the lens automatically returns to the previous shift position,
causing the picture move. Do not rotate the lens while lens shift is in progress
(i.e., while the image is moving).
When rotating the lens, keep it supported and rotate it slowly.
Pay attention to your surroundings when rotating the lens. Light from the
product projected into the eyes could cause visual impairment.
Rotating the Arm
When the arm latch is disengaged by pressing the arm latch release, the arm can be
rotated 90°. Lift the latch release to latch the arm once more.
Unlatch
A
Latch
B
Rotating the Projector Head
When the head latch is disengaged by sliding the head latch release to the FREE
position, the projector head can be rotated 360° in 90° increments.
FREE position
A
LOCK position
B
The lens can be rotated when the head latch release is in the FREE position and
latches when the release is in the LOCK position.
CAUTION
d
Do not return the arm to the storage position with the lens facing down. Failure
to observe this precaution could scratch or break the lens.
2
Attach the supplied power cord lock.