Adjusting Focus - FujiFilm FP-Z8000 Owner's Manual

TIPS
b
Lens shift can also be adjusted from the menus.
The selected shift position is stored when the lens is rotated.
When you latch the lens after rotating it to a new position, the previously-selected shift
position will be recalled automatically.
Holding the SHIFT button for three seconds displays a confirmation dialog where the
lens can be restored to the home position.
Focus
The sharpness of the projected image can be adjusted by focusing the projector. Use Test Pattern 1
when focusing.
1
: Use the "FOCUS1" and "FOCUS2"
buttons on the remote control.
Remote control
2
Press the selector left or right to focus.
The selected focus setting (1 or 2) is
identified by an icon.
3
Press BACK to exit when the operation is complete.
TIP
b
Focus can also be adjusted from the menus.

Adjusting Focus

Focus can be adjusted using the FOCUS1 and FOCUS2 buttons on the remote control.
Before
: Press the LENS button repeatedly
until focus settings are displayed.
Projector