Audio Settings; High Altitude Mode - FujiFilm FP-Z8000 Owner's Manual

After confirming the password by entering it a
second time, press ENTER to proceed. You
must supply the password when turning the
projector on with On selected for Power on
Lock.
CAUTION
d
Failure to provide the correct password will prevent the projector being used or initialized. Be
careful not to lose the password. Consult with staff at the point of purchase should the
password be lost.
Power on Lock
Selecting On requires users to enter the password chosen using Change password whenever the
projector is turned on.
On
TIP
b
After choosing On, you will be prompted to enter the password. Enter the password to
proceed.

Audio Settings

Adjust audio settings.
Press ENTER to display options and then select the desired item.
Mute
Select On to mute audio.
On
Volume
Adjust volume.
Source (FP-Z6000 only)
Switch between AUDIO inputs. Selecting On disables input from sources not connected to the
AUDIO terminal.
On

High Altitude Mode

When using the product at high altitudes (above 1,500 m/4,900 ft), select On for High Altitude
Mode to ensure that the product's internal temperature-control mechanism functions correctly.
Failure to observe this precaution could shorten the life of the product's parts.
On
Options
Off
Options
Off
Options
0 — 5 — 10
Options
Off
Options
Off