CAUTIONS
d
Before connecting cables, switch the projector to standby and confirm that the
peripheral is either off or in standby mode. After connecting the cable to both devices,
turn the projector on first and then turn on the peripheral.
Some devices require an adapter and/or a dedicated cable.
Indicator Lamps
Projector status is shown by whether the indicator (ON/STANDBY, TEMP, and STATUS) lamps are
on, flashing, or off.
The statuses shown by the condition of the indicator lamps are listed below.
Lamp
ON/STANDBY
TEMP
On (red)
Off
On (green)
Off
Flashing
On (green)
(red)
Flashing (red)
Off
On (green) or
On (red) or
flashing
off
flashing (red)
(green) or off
STATUS
Projector status
Off
Projector in standby mode.
Off
Projector on.
Off
Projector temperature elevated.
Off
Network standby.
On (red) or
Problem with cooling fan.