System Setup : Advanced; Light Source Information; Shutter Setting - FujiFilm FP-Z8000 Owner's Manual

SYSTEM SETUP : Advanced

Adjust advanced system settings.
Light Source Mode
Choose a light-source brightness mode.
Normal
Light Output Setting
Adjust the brightness of the light source. Choose from values of from 20 to 100 in increments of
10. This option is available only when Bright is selected for Picture Mode in the PICTURE menu.
When Eco(60%) is selected for Light Source Mode in the SYSTEM SETUP : Advanced menu,
brightness is fixed at 60%.

Light Source Information

View information about the light source.
Press ENTER to view information about the light source.
Option
Light Source Usage Total The total length of time the light source has been on in Normal
Time and Eco(60%) modes.
The length of time the light source has been on with Normal
Normal
selected for Light Source Mode.
The length of time the light source has been on with Eco(60%)
Eco(60%)
selected for Light Source Mode.

Shutter Setting

Adjust projector shutter settings.
Pressing ENTER displays a sub-menu containing the items listed below.
Fade-in
Choose how long the picture takes to fade in after the shutter button is pressed to resume
projection.
Off 0.6s 1.0s 2.0s
CAUTION
d
Light Source Mode

Light Output Setting

Light Source Information

Shutter Setting

Operation Settings

Date and Time Setting

Schedule Setting

Control Channel

Standby Settings

LAN Settings

Options
Eco(60%)
Description
Options
3.0s 4.0s 5.0s 7.0s 10.0s