Height Adjustment - FujiFilm FP-Z8000 Owner's Manual

Overview
Spacing


Height Adjustment


Ceiling Mount Installation Precautions

Spacing
When installing the projector, choose a location where the vents will be a safe distance from walls
or other obstructions. When installing units one above another, for example on shelves, leave a
distance of no less than approximately 10 cm (0.33 ft) between the shelves and the wall.
Intake vent: 40cm
A
Exhaust vent: 40cm
B
When installing two or more projectors side-by-side, leave a space of at least 80 cm (2.62 ft)
between them. You will also need to ensure that the warm air from the exhaust vent does not enter
any of the projectors' intake vents.
CAUTIONS
d
Do not obstruct the vents. The build-up of heat inside the projector could cause fire.
At high temperatures (over 35 °C (95 °F)), output will gradually drop until Eco(60%) is
selected for Light Source Mode, after which any additional use will place the projector
on standby. When the projector is turned on after having been allowed to cool, output
will be restored to 100%.
Output may drop at low temperatures, but will recover automatically as the temperature
rises.
Height Adjustment
The height of the projector can be adjusted (by about 2.5 cm) using the adjustable feet. If desired,
the feet can be removed and attached to the top of the projector. The projector ships with the feet
attached to the bottom.
Feet attached to bottom
Adjustable feet
Feet attached to top
Adjustable feet