Date And Time Setting; Schedule Setting; Control Channel; Standby Settings - FujiFilm FP-Z8000 Owner's Manual

Choose the length of time before the projector enters standby.
Disable 30 min

Date and Time Setting

Set the projector clock.
Press ENTER and select Date or Time to view settings for the selected item.
Option
Date Enter a value for the date in mmyydd format.
Time Enter a value for the time in hh:mm format.

Schedule Setting

Turn the projector on or off automatically
according to the day of the week.
Press ENTER and select a day of the week to
display options for the selected day.
Daily Sunday Monday Tuesday
Choose whether the projector is used on the
selected day and if so the input used and the
times at which the projector turns on or
switches to standby.
Press ENTER and select a day of the week to
display options for the selected day.
CAUTIONS
d
Date and Time Setting will be reset automatically if the projector is without power for
three consecutive hours. Leave the projector on standby when using Schedule Setting.
Schedule Setting can only be used if the projector clock has been set using Date and
Time Setting.
TIP
b
Enabling Daily configures the projector to operate on the same schedule every day,
regardless of the day of the week.

Control Channel

Choose the type of input used for projector control.
LAN・RS-232C

Standby Settings

Adjust network standby settings.
Press ENTER to display options and then select the desired item.
Enable Network Standby Mode
Options
1 hr 2 hr 3 hr 4 hr
Description
Options
Wednesday Thursday
Options
HDBaseT
8 hr 12 hr
Friday Saturday