Operation Settings - FujiFilm FP-Z8000 Owner's Manual

Fade-in is enabled only after projection has been suspended (i.e., the projector has been in
the SHUTTER state, with image and sound output suspended) for at least three minutes. The
picture will not fade in if projection is resumed earlier.
Fade-out
Choose how long the picture takes to fade out when the shutter button is pressed to suspend
projection.
Off 0.6s 1.0s 2.0s
Dynamic Black
Choose whether the projector detects when a solid black image is displayed and automatically
reduces output by 70%. The projector automatically restores output to 100% when an image that
is not solid black is displayed.
On
TIP
b
Selecting On overrides the option selected for Light Source Mode.
Dynamic Contrast Ratio
If On is selected, the projector will detect when a solid black image is displayed and automatically
suspend output. Dynamic black will be given priority if On is selected for Dynamic Black.
On

Operation Settings

Set timers and the like.
Press ENTER to display options and then select the desired item.
Direct Power On
If On is selected, the projector will turn on automatically (i.e., without your pressing the power
button) if the main power switch is on when power is supplied.
On
Auto Power Off
Choose the length of time before the projector automatically enters standby.
Disable 3 min 10 min
Fade-Out timer
Choose how long it takes in the absence of an input signal for output to resume after the shutter
button is pressed to suspend projection.
Disable 5 min 10 min
Sleep Timer
Options
3.0s 4.0s 5.0s 7.0s
Options
Off
Options
Off
Options
Off
Options
15 min 20 min 25 min
Options
15 min 20 min 25 min
10.0s
30 min
30 min