Security Settings; Change Password - FujiFilm FP-Z8000 Owner's Manual

Option Option
Turn the projector ID off. The projector can be controlled by from
Off
any remote, regardless of its ID.
Choose the projector ID. You will need to set the remote control to
On the same ID (
(../../about_this_product/remote_control/#id_set)).
Follow the steps below.
1
Highlight Projector ID Setting in the SYSTEM SETUP : Basic menu and press ENTER to
view ID selection options.
2
Select On for Projector ID Setting.
3
Enter a value between "01" and "99" for
Projector ID and select ENTER.
4
Select Yes when prompted. A second
confirmation dialog will be displayed;
highlight OK and press ENTER to confirm
the projector ID.
CAUTION
d
After choosing a projector ID, check the IDs for the projector and remote control and confirm
that they have been updated.
TIP
b
This item cannot be used to change the remote control ID (
(../../about_this_product/remote_control/#id_set)).
Projectors with IDs off can be controlled by remotes with any ID between "01" and "99".

Security Settings

Adjust security settings.
Press ENTER to display options and then select the desired item.

Change password

Press ENTER and change the password.
Choose a password of six characters containing
any combination of the numbers 1 through 4.
Press the selector up for 1, right for 2, down for
3, or left for 4.
Description Description
Choosing IDs
a
Choosing IDs
a