Notices; Federal Communications Commission (Fcc) Warning; For Customers In Canada; For Customers In New Zealand And Australia - FujiFilm FP-Z6000 Manual

Verifi cation
Model Number: FP-Z8000/FP-Z6000
Trade Mark: Fujifi lm
Company name: FUJIFILM North America Corporation
Address: 200 Summit Lake Drive, Valhalla, NY 10595-1356, U.S.A.
Tel: 019147898100
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Caution: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
FCC Warning: To assure continued compliance, follow the attached installation instructions.
This includes using the provided power cord and shielded interface cables when connecting
to computer or peripheral devices. Also, any unauthorized changes or modifi cations to this
equipment could void the user's authority to operate this device.

Federal Communications Commission (FCC) Warning

Federal Communications Commission (FCC) Warning
• A shielded-type power cord is required in order to meet FCC emission limits and also to
prevent interference to the nearby radio and television reception. It is essential that only
the supplied power cord be used.
• Use only shielded signal cables to connect I/O devices to this equipment.

For Customers in Canada

For Customers in Canada
CAN ICES-3(A)/NMB-3(A)
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

For Customers in New Zealand and Australia

For Customers in New Zealand and Australia
WARNING: This equipment is compliant with Class A of AS/NZS CISPR32. In a residential
environment this equipment may cause radio interference.

NOTICES

EN-9