Table of Contents
Advertisement
2.5.2 Using DC Power Jack
When an external power system is not available, the switch provides a DC jack to receive power from typical
AC-DC power adapter alternatively.
Interfaces
DC Jack ( -D 6.3mm / + D 2.0mm)
Note:
1. When using DC Jack, put caps on the contacts of the terminal block.
2. Before you begin the installation, check the AC voltage of your area. The AC power adapter which is used to
supply the DC power for the unit should have the AC voltage matching the commercial power voltage in
your area
.
-16-
Advertisement
Table of Contents
