Nauticam 18809 Instruction Manual

Instruction Manual for
18809/18810/18812/18813/18815 N120
180/140/230/250mm Optical Glass Wide
Angle Port
(This manual applies to product shipped from early 2022, 18809
serial number from A512606 onwards; 18810 from A490446
onwards; 18812 from A522451 onwards, 18813/18815 coming soon)
F
OREWORD
Thank you for your purchase of a NAUTICAM product.
At NAUTICAM, we pride ourselves in the ability to recognise the requirements
of professional as well as amateur underwater photographers and fulfill them
through the innovative designs of our products. We strive to achieve a high
level of user-friendliness by allowing stress-free installation and easy operation
of all important functions of the camera.
Each product is individually inspected and water pressure tested to ensure
optimum quality.
Please read this manual carefully before using the product, this will maximise
its performance as well as its lifetime.
W
ARRANTY
All NAUTICAM Products are warranted against any material and
manufacturing defects for two years from the date of purchase for consumer
use. This warranty only applies to products purchased from authorised
NAUTICAM dealers and does not extend beyond the original retail purchaser.
To return your product for service, please contact your regional authorized
service centre(s). Please note that this warranty only applies when the product
is purchased in the territory where the service centre is located.
NAUTICAM does not hold responsibility for damage, of any nature, to any
equipment used with and/or placed within our products.
NAUTICAM accepts no liability for any loss of captured images or the
inability to capture images even if it is due to the malfunctioning of our
products.
Unauthorised modifications and/or repairs of our products will automatically
invalidate the warranty.
P C
ACKAGE ONTENTS
•
N120 180/140/230/250mm optical glass wide angle port
•
Neoprene cover
•
Rear cap
•
Carrying bag
•
Spare O-ring
I P
DENTIFICATION OF ARTS
#18810 N120 140mm Optical Glass Dome Port is used as an example in this
instruction manual, other dome ports will be slightly different in term of
appearance.
M
OUNT A PORT TO A HOUSING
To remove housing cap:
Push the safety button of the port locking lever downwards.
Turn the port locking lever to the release position as shown.
Lift the housing cap.
Alignment
"O" mark
Current as of 2022-03-02