Program Creation Example - Yamato IN604 Instruction Manual

Program Creation Example

 The program pattern below is explained as an example.
Step No.
S01
S02
S03
S04
Press the PROGRAM key to display the step number selection
1
screen.
2
Display "SO1" using the "▼▲".
Press the ENTER key to display the "Set TEMP".
3
Press the ENTER key to display the setting temperature edition
4
screen. The cursor goes out and the setting temperature blinks.
5
Set the temperature to 50℃ using the "▼▲".
Press the ENTER key to decide the temperature.
6
Press the PROGRAM key to display the "Set time" selection
7
screen.
Press the ENTER key to display the setting period edition screen.
8
The cursor goes out and the setting period blinks.
9
Set the period to 30 min using the "▼▲".
Press the ENTER key to decide the period.
10
Setting Temp. Setting Time
50.0℃ 30min
0min
20.0℃
-10.0℃ 15min
- End
33
Operation Method
Repeat Start Repeat Count
No -
No -
S02 1
- -
Select step
Set TEMP
S01
Set TEMP
S01
Set TEMP
S01
Set TEMP
S01
Set time
S01
Set time
S01
Set time
S01
Set time
S01
S01
Program
► 0.0℃
0.0℃
50.0℃
► 50.0℃
► 0min
0min
30min
► 30min