When Using The Unit - Yamato IN604 Instruction Manual

When Using the Unit

CAUTION!
1. Do not use explosive or flammable substance
 Never use explosive substances, flammable substances and substances that include
explosive or flammable ingredients in this unit. Explosion or fire may occur.
2. Do not make an overload
 The withstand load of shelf is 15kg
（uniform load）Set the samples apart
each other.
Shelf
4. Notes for some kind of sample
 Stainless steel SUS304 is used for interior; however, it may be corroded by strong acid etc.
And the door packing made of rubber may be corroded by some kind of solvent, e.g. alkaline,
oil, halogen etc.
 Much frost on the evaporator degrades the refrigeration capability, which may cause
uncontrollability of setting temperature. Be careful, especially, to treat samples with large
water content that generate much frost. Perform the defrost operation if frost is observed
through the frost inspection window.
 The equipment with large heat load cannot be used because the temperature in furnace
increases.
Samples
15Kg
Before Using this unit
Flammable 爆発
or explosive
substance
可燃
3. Do not set samples in close formation
 The temperature in furnace cannot be
controlled if too much samples are set
there. Make sure to use the shelf and
set samples apart each other so as to
make the free space of 30% or more to
the furnace to acquire accuracy of
temperature.
Make the free space of 30% or more
7