FT-50 Fill Level Inspector Service Manual
3-10
4. Insert the vertical support pipe into the tripod until it stops. Do
not completely tighten the retaining bolts, leave them loose
enough so you can make alignment adjustments later.
No.
Description
1
Support Pipe
2
Stop Plate
Figure 3-6. Inserting the vertical support pipe into the base tripod.
5. If you are using a standard or high mount, attach the support
braces to the tripod. Do not completely tighten the retaining
bolts, leave them loose enough so you can make alignment
adjustments later.
No.
Description
1
Support Brace
2
Retaining Bolts
Figure 3-7. Attaching the support braces to the base tripod.
Industrial Dynamics Company, Ltd. Document 40255-0600
2
1
2
1