Labels And Markings; Glossary Of Terms - 3M PROTECTA 3590500 User Instructions

7.0

LABELS and MARKINGS

7.1 LABELS: Figure 15 illustrates labels present on the SRD. Labels must be replaced if they are not present or are not fully
legible. Information provided on each label is as follows:
;
Label images are intended to be representative. Please refer to your product labels for specific information.
1) Read all instructions before use.
2) Do not load over an edge.
3) Inspection Log
4) Serial Number
5) Manufactured (Year/Month)
6) Lot Number
A 7) Model Number
8) Length (m/ft.)
9) Material Specification
10) Capacity
11) Maximum Arresting Force
12) Average Arresting Force
13) Maximum Arresting Distance
1) Read all instructions before use.
2) Do not load over an edge.
3) Inspection Log
4) Serial Number
5) Manufactured (Year/Month)
6) Lot Number
B 7) Model Number
8) Length (m/ft.)
9) Material Specification
10) Capacity
11) Maximum Arresting Force
12) Average Arresting Force
13) Maximum Arresting Distance
1) Read all instructions before use.
2) Impact Indicator Inspection
3) Inspection Log
4) Serial Number
5) Manufactured (Year/Month)
6) Lot Number
C 7) Model Number
8) Length (m/ft.)
9) Material Specification
10) Capacity
11) Maximum Arresting Force
12) Average Arresting Force
13) Maximum Arresting Distance
1) To lower, turn clockwise.
D
2) To raise, turn counterclockwise.
E Retrieval operation; see Section 4.5 for instructions.
8.0

GLOSSARY OF TERMS

8.1 DEFINITIONS: The following terms and definitions are used in these instructions.
;
For a comprehensive list of terms and definitions, please visit our website: www.3m.com/FallProtection/ifu-glossary
• AUTHORIZED PERSON: A person assigned by the employer to perform duties at a location where the person will be exposed to a fall
hazard.
• COMPETENT PERSON: One who is capable of identifying existing and predictable hazards in the surroundings or working conditions
which are unsanitary, hazardous, or dangerous to employees, and who has authorization to take prompt corrective measures to
eliminate them.
• FALL ARREST SYSTEM: A collection of Fall Protection equipment configured to protect the user in the event of a fall.
• QUALIFIED PERSON: A person with a recognized degree, certificate, or professional standing, or who by extensive knowledge,
training, and experience has successfully demonstrated their ability to solve or resolve problems relating to Fall Protection and Rescue
systems to the extent required by applicable national, regional, and local regulations.
• RESCUER: A person using the Rescue system to perform an assisted rescue.
• RESTRAINT SYSTEM: A collection of Fall Protection equipment configured to prevent the user from reaching a fall hazard. No free fall
is permitted.
• USER: A person who performs activities while protected by a Fall Protection system.
19