Patch Activate - H3C S3100-52P Command Manual

Command Manual – System Maintenance and Debugging
H3C S3100-52P Ethernet Switch
Description
Use the display transceiver manuinfo interface command to display part of the
electrical label information of a single or all pluggable transceivers customized by H3C.
Related commands: display transceiver alarm interface, display transceiver
diagnosis interface, display transceiver interface.
Examples
# Display part of the electrical label information of the specified pluggable transceiver
customized by H3C.
<Sysname> display transceiver manuinfo interface GigabitEthernet 1/1/1
GigabitEthernet1/1/1 transceiver manufacture information:
Manu. Serial Number
Manufacturing Date
Vendor Name
Table 3-10 Description on the fields of display transceiver manuinfo interface
Manu. Serial Number
Manufacturing Date
Vendor Name

3.1.15 patch activate

Syntax
patch activate
View
System view
Parameters
None
Description
Use the patch activate command to place DEACTIVE patches into the ACTIVE state,
replacing the original codes.
: 213410A0000054000251
: 2006-09-01
: H3C
Field
Serial number generated during debugging and testing of
the transceiver customized by H3C
Debugging and testing date of the transceiver customized
by H3C. The date takes the value of the system clock of
the computer that performs debugging and testing.
Vendor name of the transceiver customized by H3C, that
is, H3C.
Chapter 3 Device Management Commands
Description
3-15