Regency Fireplace Products Gi29LE Owners & Installation Manual page 38

Gi29 Panel Installation
installation
(Part # 311-901, 311-903, 311-904, 311-905, 311-906, 311-907)
9. Install the front panel(s)* by placing between the front of the firebox and the media tray. If the front panel is too tight, there are adjustment slots on
the media tray to allow for looser fitting. Loosen the two screws on the media tray and slide it backward or forward as needed. Tighten the screws
once the media tray is in the desired location.
• *The front panel in the black steel/black glass panel set is a single
part. The front panel for the brick panel set is split into two parts.
10. Final installation.
920-431
38 | Gi29 Direct Vent Gas Insert
3 04.08.22