Specifications - Renesas RX72M User Manual

RX72M CPU Card with RDC-IC User's Manual
1.

Specifications

Item
Product name
Board product No.
Supported inverter board
Exterior view
MCU Product group
Product No.
CPU max.
operating frequency
Bit count
Package / Pin count LFBGA / 224 pins
ROM
RAM
MCU input clock
Input power supply voltage
Supported sensors
Supported emulator
Connectors
Switch
LEDs
Operating temperature
Operating humidity
*1 Use a cable less than 3 m in length to connect to the EtherCAT connector of this product. (Since the EMC test of this
product is conducted with the length of the cable to be connected specified as 3m or less)
R12UZ0098EJ0100 rev.1.00
Aug. 23, 2021
Table 1-1 Specification of RX72M CPU Card with RDC-IC
Specification
RX72M CPU Card with RDC-IC
RTK0EMXDE0C00000BJ
Inverter board (P/N: RTK0EM0000B10020BJ) included in Evaluation
System for BLDC Motor
or
Inverter board (P/N: RTK0EM0000B11020BJ) included in Evaluation
System for Stepping Motor with Resolver
Note: Appearance of actual product may differ from photo.
RX72M group
R5F572MNDDBD
240 MHz
32 bits
4MB
1MB
24MHz
DC 5 V (±5%)
Selectable among the following:
• Power supply from supported inverter board
• Power supply from USB connector
Resolver sensor, Hall sensor and encoder
E2 On-Board (emulator on board)
• Emulator connector (USB)
• Inverter board connectors x 2
• Serial communication connectors
• EtherCAT connector *1
• Resolver sensor connector
• Hall sensor connector
• Encoder connector
• 2nd inverter connector (unmounted)
MCU external reset switch
User control LEDs x 2
Room temperature
No condensation
Page 7 of 27