Table of Contents
Advertisement
Simrad Echo sounder system Installation Manual
a
If applicable: Connect the keyboard and the mouse to USB sockets on the
Processor Unit.
b
Insert the USB flash drive.
3
Install the operating software.
a
From the Windows
b
Locate the executable setup file (
c
Copy the file to a temporary folder on the "D" drive.
d
Double-click the setup executable file to start the installation.
e
Select the check box to accept the license terms and conditions.
f
Select
Install
g
Follow the instructions provided by the wizard.
We recommend that you install the software in the default folder suggested
by the wizard.
h
Close File Explorer.
i
Remove the USB flash drive.
4
On the Processor Unit desktop, double-click the echo sounder icon to start the
program.
5
If applicable: Disconnect the keyboard and the mouse from the Processor Unit.
Related topics
Setting to work, page 37
Obtaining and installing the software license
To use the echo sounder system with a transceiver you need a valid software license.
Before you can use the echo sounder system you must obtain a "license string" and install
it on your computer. Without a license you will not be able to communicate with the
transceiver. This procedure assumes that the operating software has been successfully
installed on the computer.
Context
The software license is a 32 character hexadecimal string based on the transceiver's serial
number. It defines several key parameters that control the functionality and behaviour
of the transceiver(s) you use. Each software license code "unlocks" one transceiver for
operational use with a set of predefined properties.
The software license is not linked to the physical computer. You can therefore easily
move the software from one computer to another, just remember to make a copy of
the license string.
40
®
button, right-click to open File Explorer.
Start
.
).
.exe
110-0007509/A
Advertisement
Table of Contents
