Emission Control Systems - Polaris RANGER 2019 Owner's Manual

EMISSION CONTROL SYSTEMS

EMISSION CONTROL SYSTEMS
NOISE EMISSION CONTROL SYSTEM
Do not modify the engine, intake or exhaust components, as doing so may affect
compliance with U.S.A. EPA noise control requirements (40 CFR 205) and local
noise level requirements.
SPARK ARRESTER
Your POLARIS vehicle has a spark arrester that was designed for on-road and
off-road operation. It is required that this spark arrester remain installed and
functional when the vehicle is operated.
EXHAUST EMISSION CONTROL SYSTEM
Exhaust emissions are controlled by engine design. A fuel injection system
controls fuel delivery. The engine and fuel injection components are set at the
factory for optimal performance and are not adjustable.
Your engine is designed to operate on ultra low sulfur diesel fuel only. Use of any
other fuel may result in your engine no longer operating in compliance with
emissions requirements.
ELECTROMAGNETIC INTERFERENCE
This spark ignition system complies with Canadian ICES-002.
This vehicle complies with the EMC requirements of UN ECE Regulation 10.
Non-ionizing Radiation: This vehicle emits some electromagnetic energy.
People with active or non-active implantable medical devices (such as heart
monitoring or controlling devices) should review the limitations of their device
and the applicable electromagnetic standards and directives that apply to this
vehicle.
95
Downloaded from ManualsNet.com search engine