Polaris RANGER 2019 Owner's Manual page 47

INDICATOR LAMPS
q
Check Engine
w
EPS Warning
e
Engine Hot
r
Neutral
t
Helmet/Seat Belt
y
High Beam
u
Brake Failure
i
Trailer Indicator
Downloaded from ManualsNet.com
FEATURES AND CONTROLS
This lamp illuminates when the ECM detects a Diagnostic
Trouble Code in the engine management system. Do not
operate the vehicle if this warning appears. Serious engine
damage could result. Your authorized POLARIS dealer can
assist.
This lamp illuminates to indicate that EPS has shut down.
EPS shuts down automatically 5 minutes after the engine is
turned off if the key remains in the ON position. Turn the key
off and on to reset the unit. If the light remains on after starting
the engine, the EPS system is inoperative. Your POLARIS
dealer can assist.
This lamp illuminates to indicate an overheated engine. If the
indicator flashes, a severe overheating condition exists.
This lamp illuminates when the transmission is in neutral and
the ignition key is in the ON position.
This lamp flashes for several seconds when the key is turned
to the ON position. The lamp is a reminder to wear a helmet
and your seat belt.
This lamp illuminates when the headlamp switch is set to high
beam.
This lamp illuminates when the brake system detects low
pressure in the brake hydraulic system.
This lamp illuminates when the trailer turn signals are active.
search engine
45