Polaris RANGER 2019 Owner's Manual page 137

TIRES
Operating your vehicle with worn tires will increase the possibility of skidding,
loss of control and an accident, which could result in serious injury or death.
Always replace tires when the tread depth measures 3 mm (1/8") or less.
Improper tire inflation or the use of non-standard size or type of tires may
adversely affect vehicle handling, which could result in vehicle damage or
personal injury. Always maintain proper tire pressure. Always use POLARIS
approved size and type of tires for this vehicle when replacing tires.
TIRE TREAD DEPTH
Always replace tires when tread depth is worn to 3 mm (1/8") or less.
AXLE AND WHEEL NUT TORQUE SPECIFICATIONS
Inspect the following items occasionally for tightness, and if they've been
loosened for maintenance service. Do not lubricate the stud or the lug nut.
Lug Nut
(Aluminum
Wheels)
2-Piece Flange Nut
(Steel Wheels)
Spindle Nut
Hub Retaining Nut
WHEEL REMOVAL
1. Position the vehicle on a level surface.
2. Place the transmission in PARK and apply the park brake. Stop the engine.
3. Loosen the wheel nuts slightly.
4. Elevate the side of the vehicle by placing a suitable stand under the frame.
5. Remove the wheel nuts and washers. Remove the wheel.
Downloaded from ManualsNet.com
WARNING
search engine
MAINTENANCE
Front and Rear
Front and Rear
Front
Rear
163 Nm (120 ft-
lbs.)
81 Nm (60 ft-lbs.)
149 Nm (110 ft.
lbs.)
244 Nm (180 ft.
lbs.)
135