Polaris RANGER 2019 Owner's Manual page 139

POSITION BULB AND INDICATOR BULB REPLACEMENT
1. Remove the hood from the front cab.
2. Locate the bulb on the back side of the headlight housing.
3. Disconnect the harness from the bulb. Be sure to pull on the connector, not
on the wiring.
4. Turn the bulb counterclockwise and remove it from the headlight housing.
5. Install the new bulb into the housing and rotate it clockwise 90° to lock it in
place.
Make sure the tab on the bulb locates properly in the housing.
6. Install the harness onto the new headlight bulb and install the hood.
HIGH/LOW BULB REPLACEMENT
1. Remove the hood from the front cab.
2. Locate the High/Low bulb on the back side of the headlight housing.
3. Disconnect the harness from the bulb. Be sure to pull on the connector, not
on the wiring.
Downloaded from ManualsNet.com
NOTE
search engine
MAINTENANCE
137