Polaris RANGER 2019 Owner's Manual page 128

Table of Contents

Advertisement

MAINTENANCE
ALTERNATOR BELT
Belt Adjustment
Check the alternator belt at the correct service interval as outlined in the Periodic
Maintenance Chart.
Stop the machine on a flat level surface. Put the gear selector in Park, stop the
engine and exit the vehicle. See the Stopping the Engine section.
1. Raise the cargo box.
2. The belt tension is correct with 7.6 mm (0.3 in.) of belt deflection at the mid
span at the top of the belt
3. If the belt tension is not correct, loosen the mounting bolt
e
bolt
.
4. Move the top of the alternator
5. Tighten the mounting bolt to 23.5-27.5 Nm (17.3-20.3 ft-lbs).
6. Tighten the adjustment bolt to 23.5-27.5 Nm (17.3-20.3 ft-lbs).
7. Lower the cargo box.
FUEL FILTER / WATER SEPARATOR
The fuel filter/water separator is located under the seat on the left side of the
vehicle, between the engine and fuel tank.
Inspect the separator daily for leaks. Drain water and replace the separator at
the intervals outlined in the Periodic Maintenance Chart. Service the separator
more frequently if the vehicle is operated with inferior fuel.
126
Downloaded from
ManualsNet.com
q
, when 89 N (20 lbf) is applied to the belt.
r
to tighten the belt.
search engine
w
and adjustment

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents