Polaris RANGER 2019 Owner's Manual page 64

OPERATION
PRE-RIDE INSPECTION
Failure to inspect and verify that the vehicle is in safe operating condition
before operating increases the risk of an accident. Always inspect the vehicle
before each use to make sure it's in safe operating condition.
ITEM
Brake system/pedal travel
Brake fluid
Front suspension
Rear suspension
Steering
Tires
Wheels/fasteners
Frame nuts, bolts, fasteners
Drive belt
Fuel and oil
Coolant level
Coolant hoses
Throttle
Indicator lights/switches
Air filter
Headlamps
Brake light/tail lamps
Seat latch
Seat belts
62
Downloaded from ManualsNet.com
WARNING
REMARKS
Ensure proper operation
Ensure proper level
Inspect, lubricate if necessary
Inspect, lubricate if necessary
Ensure free operation
Inspect condition and pressure
Inspect, ensure fastener tightness
Inspect, ensure tightness
Inspect, ensure installed correctly
Ensure proper levels, check underneath vehicle
for leaks
Ensure proper level
Inspect for leaks
Ensure proper operation
Ensure proper operation of switches
Ensure proper operation of glow plug indicator
and glow plugs
Inspect and clean without removing from the
vehicle; remove air filter only when replacing it
Check operation, apply POLARIS dielectric
grease when lamp is replaced
Check operation
Push down on the seat back to ensure the latch
is secure
Check length of belts for damage, check latches
for proper operation
search engine
PAGE
page 132
page 132
page 101
page 101
-
page 135
page 135
-
-
page 101
page 111
-
page 34
page 45
page 31
page 122
page 136
-
-
page 36