Polaris RANGER 2019 Owner's Manual page 121

BELT INSTALLATION
Be sure to install belt in the same direction as it was removed.
1. With the clutch spreader tool
and over the driven clutch.
2. Rotate the driven clutch and walk the belt into the clutch.
3. Remove the clutch spreader tool from driven clutch.
4. Rotate / spin the driven clutch and belt approximately 5-7 times to properly
seat the belt in the driven clutch.
5. Install the clutch cover into wheel well as shown above.
6. Rotate clutch cover over A-Arm
intake boots or electrical harness.
7. Pull clutch cover backwards and align with bolt holes on inner clutch cover as
shown below.
Downloaded from ManualsNet.com
NOTE
q
installed, loop the belt over the drive clutch
w
as shown below. Use care not to damage
search engine
MAINTENANCE
119