Polaris RANGER 2019 Owner's Manual page 144

MAINTENANCE
BATTERY REMOVAL
Improperly connecting or disconnecting battery cables can result in an
explosion and cause serious injury or death. When removing the battery,
always disconnect the negative (black) cable first. When reinstalling the
To remove the battery, do the following:
1. Remove the storage bin under the passenger seat to access the battery.
2. On conventional batteries, remove the battery vent tube.
3. Disconnect the black (-) battery cable first. Disconnect the red (+) battery
cable last.
4. Remove the battery hold-down strap.
5. Lift the battery out of the vehicle. Be careful not to tip a conventional battery
sideways, which could spill electrolyte.
If electrolyte spills, immediately wash it off with a solution of one tablespoon
baking soda and one cup water to prevent damage to the vehicle.
142
Downloaded from ManualsNet.com
battery, always connect the negative (black) cable last.
search engine
WARNING
NOTICE