Motion Detector - Zennio Presentia W0 User Manual

2.2 MOTION DETECTOR

Presentia W0 incorporates six independent motion detection channels and one for
occupancy detection.
Motion detection consists in sending objects to the bus whenever the device
observes a moving body (or no longer observes it) in the environment of the
room where it has been installed.
Occupancy detection is an algorithm that allows determining, through a
multiple sensor configuration, whether a particular space is under occupation
no matter if the occupant moves or not (i.e., no matter if the device is
detecting motion in the room or not).
It also allows setting different luminosity setpoints or object types for day and night
time as well as activating or deactivating the motion indicator LEDs.
Presentia W0 can also set custom sensitivity of the motion sensor and measure the
luminosity level of the room. This measurement will be made according to the colour
of lens selected.
Please refer to the specific manual "Presence Detector" available in Presentia W0
product section at the Zennio website (www.zennio.com) for detailed information about
the functionality and the configuration of the related parameters.
Please note:
References to presence detection in this manual, in this case, correspond to
motion detection.
The constant light regulation functionality is not included (the working plane
on which the device is installed is not suitable for this functionality).
The unit of measurement for the luminosity level is percentage.
https://www.zennio.com Technical Support: https://support.zennio.com
Presentia W0
11