Table of Contents
Advertisement
Troubleshooting
Message
Place original and press
Start key.
Print overrun
This page isn't complete.
Remove originals in
Document Processor.
Replace Toner.
Scan memory overflow. Job
is ended.
7-4
Procedure
The machine will attempt to make copies from any originals that
remain uncopied.
Reset all of the originals on the original table and try to copy
again.
The data transferred to the machine was too complex to print on a
page.
To continue printing, press the right select key. To cancel printing,
press the left select key.
This appears if there is a document in the document processor
when the power is turned on. It also appears when the paper has
jammed while being fed from the document processor because of
the way it was placed.
Remove all the document pages inside the document processor,
and set them again correctly.
Toner has run out so further copying or printing is impossible.
Replace the toner container using a new toner kit.
Scan memory overflow. Job is ended. Press the left select key to
cancel the copying procedure.
The total amount of data received by the machine exceeds the
machine's internal memory. To verify the current amount of
memory, print out a Status Page.
To cancel printing, press the right select key. If Auto Error Clear is
set to On, printing will be automatically resumed after a preset
period of time. Refer to Chapter 5 in Advanced Operation
Guide, Auto Error Clear.
Lower the image quality. Refer to Chapter 2 in Advanced
Operation Guide, Selecting Image File Format.
Reference Page
—
—
7-10
6-2
5-4
Advertisement
Table of Contents
