Reset Packet-Drop Interface - H3C S12500 Series Manual

Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
interface-type: Specifies an interface type.
interface-number: Specifies an interface number.
interface-number.subnumber: Specifies a subinterface number, where interface-number is a main
interface (which must be a Layer 3 Ethernet interface) number; subnumber is the number of a subinterface
created under the interface. The value range for the subnumber argument is 1 to 4094.
Usage guidelines
Before collecting traffic statistics for a specific period of time on an interface, clear the old statistics first.
If no interface type is specified, this command clears statistics for all interfaces.
If only the interface type is specified, this command clears statistics for all interfaces of that type.
If both the interface type and the interface or subinterface number are specified, this command clears
statistics for the specified interface or subinterface.
Examples
# Clear the statistics of GigabitEthernet 3/0/1.
<Sysname> reset counters interface GigabitEthernet 3/0/1
Related commands
• display interface
display counters interface
•
• display counters rate interface

reset packet-drop interface

Use reset packet-drop interface to clear the dropped packet statistics on an interface or multiple
interfaces.
Syntax
reset packet-drop interface [ interface-type [ interface-number ] ]
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
interface-type: Specify an interface type. If you do not specify an interface type, this command clears
dropped packet statistics on all the interfaces on the device.
25