Parameters
vsi-interface-id: Specifies a VSI interface number in the range of 0 to 4093.
Examples
# Create VSI-interface 100 and enter VSI interface view.
<Sysname> system-view
[Sysname] interface vsi-interface 100
[Sysname-Vsi-interface100]
Related commands
gateway vsi-interface
mtu
Use mtu to set the MTU for a VSI interface.
Use undo mtu to restore the default.
Syntax
mtu size
undo mtu
Default
The MTU is 1500 bytes for a VSI interface.
Views
VSI interface view
Predefined user roles
network-admin
mdc-admin
Parameters
size: Specifies an MTU value. In software versions earlier than Release 1138P01, the MTU value
range is 46 to 1500 bytes. In Release 1138P01 and later versions, the MTU value range is 46 to 9008
bytes.
Examples
# Set the MTU to 1430 bytes for VSI-interface 100.
<Sysname> system-view
[Sysname] interface vsi-interface 100
[Sysname-Vsi-interface100] mtu 1430
reset counters interface vsi-interface
Use reset counters interface to clear packet statistics on VSI interfaces.
Syntax
reset counters interface [ vsi-interface [ vsi-interface-id ] ]
Views
User view
46