H3C S12500 Series Manual page 20

Routing switches
Hide thumbs Also See for S12500 Series:
Table of Contents

Advertisement

GE3/0/4
GE3/0/5
GE3/0/6
GE3/0/7
GE3/0/8
GE3/0/9
# Display brief information about interface GigabitEthernet 3/0/3, including the full description of the
interface.
<Sysname> display interface brief
The brief information of interface(s) under bridge mode:
Link: ADM - administratively down
Speed or Duplex: (a)/A - auto; H - half; F - full
Type: A - access; T - trunk; H - hybrid
Interface
GE3/0/3
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Table 5 Command output
Field
The brief information of interface(s)
under route mode:
Link: ADM - administratively down;
Stby - standby
Protocol: (s) – spoofing
Interface
Link
Protocol
Description
DOWN auto
A
DOWN auto
A
UP
100M(a) F(a)
DOWN auto
A
UP
100M(a) F(a)
UP
100M(a) F(a)
GigabitEthernet 3/0/3 description
Link Speed
Duplex Type PVID Description
UP
100M(a) F(a)
Description
Brief information about Layer 3 interfaces.
ADM—The interface has been shut down by the network
administrator. To recover its physical layer state, run the undo
shutdown command.
Stby—The interface is a standby interface.
If the network layer protocol of an interface is UP, but its link is an
on-demand link or not present at all, this field displays UP (s), where s
represents the spoofing flag. This attribute is typical of interface Null 0
and loopback interfaces.
Interface name.
Physical link state of the interface:
UP—The link is up.
DOWN—The link is physically down.
ADM—The link has been administratively shut down. To recover its
physical state, run the undo shutdown command.
Stby—The interface is a standby interface.
Protocol connection state of the interface:
UP.
DOWN.
UP(s)—The link of the interface is an on-demand link or not present at
all.
Interface description configured by using the description command. If the
description keyword is not specified in the display interface brief
command, the Description field displays at most 27 characters. If the
description keyword is specified in the display interface brief command,
the field displays the full interface description.
14
A
1
A
1
A
1
A
1
A
1
A
999
A
1
aaaaaaaaaaaaaaaaaaaaaaaaaaaaa

Advertisement

Table of Contents
loading

Table of Contents