H3C S12500 Series Manual page 9

mdc-operator
Parameters
inbound: Displays inbound traffic statistics.
outbound: Displays outbound traffic statistics.
interface-type: Specifies an interface type.
interface-number: Specifies an interface number.
interface-number.subnumber: Specifies a subinterface number, where interface-number is a main
interface (which must be a Layer 3 Ethernet interface) number, and subnumber is the number of a
subinterface created under the interface. The value range for the subnumber argument is 1 to 4094.
Usage guidelines
This command displays traffic statistics within a statistics polling interval specified by the flow-interval
command.
To clear the Ethernet interface traffic statistics, use the reset counters interface command. For more
information, see
If no interface type is specified, this command displays traffic statistics for all interfaces that have traffic
counters.
If an interface type is specified but no interface number or subinterface number is specified, this
command displays traffic statistics for all interfaces of the specified type.
If an interface type and an interface number or subinterface number are specified, this command
displays traffic statistics of the specified interface or subinterface.
Examples
# Display inbound traffic statistics for all GigabitEthernet interfaces.
<Sysname> display counters inbound interface GigabitEthernet
Interface
GE3/0/1
GE3/0/2
GE3/0/3
GE3/0/4
......
Overflow: More than 14 digits (7 digits for column "Err").
--: Not supported.
Table 1 Command output
Field
Interface
Total (pkts)
Broadcast (pkts)
Multicast (pkts)
Err (pkts)
"reset counters interface."
Total (pkts)
100
0
Overflow
0
Description
Abbreviated interface name.
Total number of packets received or sent through the interface.
Total number of broadcast packets received or sent through the interface.
Total number of multicast packets received or sent through the interface.
Total number of error packets received or sent through the interface.
Broadcast (pkts)
100
0
Overflow
0
3
Multicast (pkts) Err (pkts)
0
0
Overflow
0
0
0
Overflow
0