Table of Contents
Advertisement
MINI 3D Scanner Quick Start Guide
1. Download the Software-Revo Scan at APP Store；
2. Find the Wi-Fi provided by the MINI, which is MINI-REVO_XXXXXXXX.
Note: The default SSID is: MINI-REVO-XXXXXXXX
The default Password is: Revopoint3d
For example: If the Serial Number of one MINI 3D scanner is: A22100122A6F00A64. The Default SSID and
Password are: SSID: MINI-REVO-A2210012
3. Type in the password: Revopoint3d and Confirm it connected successfully ；
4. Open "Revo Scan" and confirm Settings;
Before scanning, select proper Accuracy, Scan Mode, Texture and Model Format according to your scan demand.
29
COPYRIGHT ©2022 REVOPOINT 3D ALL RIGHTS RESERVED
Password: Revopoint3d
Advertisement
Table of Contents
Need help?
Do you have a question about the MINI and is the answer not in the manual?