MINI 3D Scanner Quick Start Guide
Android Smartphone Connects MINI Via USB Mode
Part List: MINI 3D Scanner, Power Bank, Phone Holder, 2-in-1 Mobile Cable and an
Android smartphone.
Hardware Connection
1)Screw the phone holder on the power bank;
2)Fix the MINI 3D Scanner on the phone holder;
3)Connect the 2-in-1mobile cable on the rear of the MINI 3D scanner, and tighten screws at both sides;
23
COPYRIGHT ©2022 REVOPOINT 3D ALL RIGHTS RESERVED
Need help?
Do you have a question about the MINI and is the answer not in the manual?