Music Mode; Other Modes Aux; Camera - Hyundai CRMD 7759 B Instruction Manual

Make an outgoing call
1) Browse through the Phone book or call
records, touch the number you want to dial
and then touch the dial icon to make an
outgoing call.
2) Touch the Dial Panel icon to open dial
panel and then touch the numeric buttons
to input phone numbers. Touch the [Clear]
icon to clear the last digit. Touch the
hangup icon to clear the entire numbers or
end the conversation. Touch the Ans icon
to make an outgoing call.
Answer an incoming call
The Bluetooth module will switch to phone
mode automatically when there is an incoming
call and the incoming call number will
be displayed on the screen.
If the ‚Auto Answer' option of the ‚Bluetooth'
submenu under the SETUP MENU is set to
‚On', the unit will answer incoming calls
automatically, otherwise you should answer
them manually.
The call duration will be displayed on the
screen after the incoming call has been put
through.
Hangup
While talking, press the hangup key on your
mobile phone or touch the hangup icon on the
screen to end the conversation.
Voice transfer
While talking, touch the ‚Voice transfer' icon
on the screen to transfer audio from the unit
to your mobile phone, and touch again to
transfer audio from your mobile phone to the
unit.
Note: Some mobile phones will transfer audio
from the unit to themselves once the incoming
call is answered.

Music mode

Pairing
Before pairing, switch the work mode of
the Bluetooth module to music mode. The
procedures of pairing under music mode is
the same as the phone mode.
A2DP
A2DP is short for Advanced Audio Distribution
Profile. The mobile phones supporting this
function can transmit stereo audio, whereas
the ones not supporting this function can
transmit mono audio only.
After pairing, open the audio player of your
mobile phone and set the transmit mode to
Bluetooth. At this time, the speakers of your
mobile phone will close automatically.
To set the transmit mode of mobile phones
to Bluetooth, please refer to the user manual
or help document of the mobile phone in use
or the audio player software because the
audio players of different mobile phones vary
greatly.
AVRCP
AVRCP is short for Audio/Video Remote
Control Profile. The mobile phones supporting
this function can control the playback of a
Bluetooth audio player.
After pairing, touch the corresponding icon
to control current playback, such as Play,
Pause, Stop, Previous, Next.
OTHER MODES
AUX
External peripheral devices with RCA audio
and video outputs can be connected
with the unit.
To enter AUX IN mode, open the SOURCE
MENU and then touch AUX IN.

Camera

This player is "camera ready". Before
accessing any camera features, you must
purchase and install a rear video camera.
Once the rear camera is connected and
operating properly, the CAMERA source
mode will become active. While the camera
is not installed, the CAMERA option appears
gray, indicating the function is not available.
The playing source will change to ‚CAMERA'
mode automatically when you reverse your
car.
EN - 97
EN