Hardware; P.vol; Ts Cal - Hyundai CRMD 7759 B Instruction Manual

6) R: A movie rating that allows admission
only to persons of a certain age, usually
17, unless accompanied by a parent or
guardian.
7) NC-17: A movie rating that allows
admission to no one under the age of 17.
8) Adult: A movie rating that is condign
to the adult only.
Procedures of changing the rating:
1) Open the parental lock
According to the same method mentioned
in the first step of changing password.
2) Change the rating
Select an appropriate rating
from the ‚rating' list.
3) Close the parental lock
Repeat the operation of the first step to
enter a 4-digit password (old or new)
and then confirm. The parental lock is
closed.
• Load Factory
To restore the default settings relating with
DVD playback (e.g.: DVD Audio, DVD
Subtitle), press the [RESET] option only.

Hardware

• Camera In
Normal: Actual scenes shot by the camera
display on the TFT monitor while reverse
driving (just like what you are looking).
Mirror: The mirror images of actual scenes
display on the TFT monitor while reverse
driving (just like looking from the rearview
mirror).
• TFT Auto Open
Auto: The TFT panel automatically opens
when the unit is turned on.
Manual: When the ignition is turned off, the
TFT panel remains open if it was opened
previously. Off: The TFT panel opens only
by pressing OPEN button when the unit is
turned on.
• Video input
NTSC: Set the color system of the TFT
screen to NTSC.
PAL: Set the color system of the TFT
screen to PAL.
AUTO: Set the color system of the TFT
screen automatically by the unit according
to the input video formats.
• Parking
On: Image displays only after your car has
been parked.
Off: Image displays at all times.

P.VOL

P.VOL means Programmable Volume. You
can balance the volume among different audio
sources using this function.
• Source
Select one playing source that you want to
set relative volume.
• Level
• You can set relative volume level
from 0 to 3.
• Led Standby
You can set the light of power button
on or off.

TS CAL

When the touch function is not sensitive
or valid, you should calibrate the touch screen
by this function.
Calibrate the touch screen just following
the screen introductions after entering the TS
CAL mode.
EQ
Audio control allows you to easily adjust the
audio system to get the best possible sound
effect.
(1) Enter the EQ setup mode
Press the [EQ] key on the remote control or
touch the EQ icon in the user interface and the
following interface will display on the screen.
(2) Select EQ mode
Touch the EQ selection bar repeatedly
and the EQ mode will change.
(3) Adjust EQ parameters
To adjust EQ parameters, touch and drag
the EQ parameters adjustment bar.
(4) Adjust Front/Rear/Left/Right fader
and balance
You can adjust front/back/left/right balance
of the speaker to get larruping listening effect
according to the surroundings and your
interest.
EN - 100