Trim Ring Installation; Uninstall - Hyundai CRMD 7759 B Instruction Manual

INSTALLATION AND UNINSTALL

Trim Ring installation

Attach the trim ring around the front panel
with two indentions on one side facing
upwards.

Uninstall

Disassemble trim ring
1) Push the trim ring upward and pull out
the upper part.
2) Push the trim ring downward and pull out
the lower part.
Disassemble the unit
1) Unscrew the 4 pieces M2×2 screws.
2) Use a screwdriver to bend straight
the bended mounting tab and tip out
the unit from the mounting bracket.
3) Pull out the unit from the mounting bracket
with both hands.
EN - 106