Initial Pellet Loading; Turning The Stove On And Off - ADURO P5 Series User Manual

5.5 Wi-Fi connection
To connect to Wi-Fi, it is necessary to download the Aduro Pellet Stove app, which is available
in Google Play and in App Store. Then, follow the guidelines for establishing Wi-Fi connection
on our website: adurofire.com/aduro-pellet-stoves/frequently-asked-questions/.
If you experience problems with getting the stove online, it may be due to your local Wi-Fi
network, your router, or the telephone setup. It is not Aduro's responsibility to ensure connection. Some of
our dealers offer the service to connect the stove to Wi-Fi.
5.6 Aduro Pellet Stove App
When you have set up the stove with the Aduro Pellet Stove app, you can start the stove (press the gear
icon) and set it to run by heat level, room temperature or calendar. Setting up the calendar is performed on
the remote.

5.7 Initial pellet loading

After filling the pellet container with pellets for the first time, the auger needs to be filled with pellets. Move
the fire cave so you can see the top of the internal auger. Close the door so the door sensor is activated and
use the menu INITIAL LOAD on the remote, and press "+" to start the augers for 6 minutes. Push STOP
INITIAL LOAD when the first pellets are visible at the top of the auger. At first run, it may be necessary to run
INITIAL LOAD a couple of times (10-12 minutes).
Whenever the pellet container runs empty during operation, ALARM 6 will appear on the display (see also
Potential Errors) and it may be necessary to run INITIAL LOAD again.

5.8 Turning the stove on and off

Accumulated and unburned pellets in the fire cave must be removed before lighting the stove. Check that the
fire cave is clean and positioned properly before lighting.
49