Using The Stove; Remote Control - ADURO P5 Series User Manual

4.4 Draft
Fumes heat up during combustion, increasing their volume. Their density is therefore lower than the one of
the surrounding colder air.
This difference between the inside and outside temperatures of the chimney results in the chimney draft.
The draft must be stronger than the fume circulation resistance so that all exhaust fumes generated during
combustion inside the stove are drawn upwards through the outlet and the flue pipe. Many weather
conditions affect the vent pipe functioning, such as rain, fog, snow, and wind being the most important as it
can create negative pressure.
Read more at adurofire.com.
Excess draft causes an increase in the combustion temperature and consequently a loss in stove efficiency.
At the same time the high fuel temperature, due to an excess amount of oxygen, wears down the
combustion chamber sooner than expected. A high chimney draft may also result in vibrations from the
exhaust fan.
On the other hand, poor draft slows down combustion resulting in a decrease in the stove temperature, fume
spillage inside the room, a loss of stove efficiency and dangerous build-up of soot in the flue pipe.

5. Using the stove

5.1 Remote
The stove can be operated with the remote control, Aduro pellet stove app or the most basic functions via
the control panel on the side of the stove.
Begin by ensuring that the stove is connected to a power source and to the chimney. We recommend using
the remote for the initial start and setup of the stove.

5.2 Remote control

The display on the remote shows basic information about the stove's operation and has 5 buttons for various
settings (see the illustration below).
On the remote you can define the desired room temperature and/or the heat level (1-5), on which the stove
should start.
Push the "+" button to select the room temperature setting and use the buttons "+" and "–" to increase or
decrease the temperature. Hold the "ON/OFF" button to turn on the stove. Then use the "–" button to select
the heat level. The higher the heat level, the faster the desired temperature will be reached. Once the
temperature is reached, the stove will regulate the heat level to maintain the desired temperature.
To activate heating without temperature control click once on "-" to show the current heat level, then use the
"+"/"-" buttons to increase or decrease heat level. Hold down the "ON/OFF" button to turn on the stove
47